Standard Features
- Horizontal ribs for easier pulling and clean up
- 25" of hopper clearance
- New 22,500-pound 10-bolt stud piloted axles with
outboard drums (These axles carry a 5-year or 500,000 mile
limited warranty)
- New suspension with 3-leaf heavy-duty springs
- 10-bolt stud piloted rims
- Sealed wiring system with D.O.T. lighting and
conspicuity striping
- Steel chemically washed then coated with a high solids
polyurethane primer, then finished with PPG Urotec
Polyurethane
- Undercoated with a synthetic rubber finish
- Aluminum Ladders front and back
- Interior hopper ladders
- Manifest holder on king pin plate
- Color-coded brake lines
- 7-way receptacle
- 2-speed landing gear
- Anti-sail mudflaps
- Removable door handles
- Midship turn lights on all trailers 30-feet and up
- Vinyl colored graphics
- 64" sides
- Full center dividers on all trailers 30-feet and up
A Maurer side discharge chute has 12 inches
of discharge height and 35° of slope while still reaching
within 2" of the side of the trailer. These traits
make this side discharge the most user-friendly on the market!
10-bolt stud piloted Steel rims come
standard, Aluminum rims are an option.
Full center dividers, Interior Hopper
Ladders and Single Ridge Strap are all standard equipment.
Maurer grain trailers have 25" of
hopper clearance when empty, 26" when equipped with 24.5
tires. This allows for better clearance moving in and out
of uneven ground and easier use of swing augers at the dump
site. Hopper doors are mounted on self-cleaning rollers.
Quality Finish
Maurer grain trailers are chemically cleaned before being
primed. A low VOC high-solids corrosion resistant PPG
polyurethane primer is applied. This primer comes from the
newest generation of primers and has a sand-blasting time
equivalent to or exceeding that of the epoxy primers.
Finally, PPG Urotec polyurethane paint is electrostatically
applied.
All Maurer Grain Trailers are undercoated
with XRC110, a synthetic rubber coating which dries to a firm,
abrasion-resistant film which is also mar-resistant. These
properties make it superior to the asphalt or tar based
undercoatings which are not mar-resistant and over time can dry
out, become brittle and chip off.
AVAILABLE
OPTIONS
- Shur-Lok Electric Roll Tarp
- Side Discharge Chute
- Aluminum Rim
- 22.5 Radials
- 24.5 Radial Recaps
- 24.5 Radials
- Choice of Color for Trailer
- Stainless Steel Corners
- Pintle Hitches
- Front and Rear Catwalks
- Double Ridge Straps
- Air Ride Suspension
- Load Sensor
- Sight Glass Windows
Model 4222 Grain Trailer equipped with
stainless steel corners and custom colorization.
Model 2411 with stainless steel corners,
custom colorization and Shur-Lok electric roll tarp.
Sight glass windows are available as on
option.
The Maurer 30 foot tandem axle tandem
hopper grain trailer has a full center divider as standard
equipment. When properly loaded the model 3022 has
an approximate weight transfer of 60% to the back axles and 40%
to the King pin.
It's offset hopper design along with its 98
inch King pin to landing leg clearance makes the model 3022
ideal for high-horsepower single axle tractors.
This trailer can also be loaded to a weight
transfer at 50:50 which is why it is also compatible with a
tandem axle truck.
These traits are why the Maurer 3022 grain
trailer is the most versatile 30 footer on the market.
|
|
SPECIFICATIONS
|
|
| |
|
24' |
|
28' |
|
30' |
|
34' |
|
36' |
|
38' |
|
40' |
|
42'
|
| Height-Ground
to Top Rail |
|
9'6" |
|
9'6" |
|
9'6" |
|
9'6" |
|
9'6" |
|
9'6" |
|
9'6"
|
|
9'6"
|
| Number
of Hoppers |
|
1 |
|
1 |
|
2 |
|
2 |
|
2 |
|
2 |
|
2
|
|
2
|
| Hopper
Clearance Empty (Approx.) |
|
25" |
|
25" |
|
25" |
|
25" |
|
25" |
|
25" |
|
25"
|
|
25"
|
| New
22,500# Axles |
|
1 |
|
2 |
|
2 |
|
2 |
|
2 |
|
2 |
|
2
|
|
2
|
| Cubic
Feet |
|
810 |
|
855 |
|
1013 |
|
1152 |
|
1191 |
|
1255 |
|
1290
|
|
1324
|
| Leveled
Bushels (Approx.) |
|
695 |
|
715 |
|
815 |
|
922 |
|
953 |
|
1010 |
|
1035
|
|
1060
|
| Heaped
Bushels (Approx.) |
|
740 |
|
765 |
|
870 |
|
985 |
|
1020 |
|
1100 |
|
1120
|
|
1135
|
| King
Pin to Landing Leg Clearance |
|
80" |
|
85" |
|
98" |
|
80" |
|
98" |
|
107" |
|
95"
|
|
90"
|
| King
Pin Setting |
|
15" |
|
15" |
|
15" |
|
18" |
|
24" |
|
15" |
|
18"
|
|
24"
|
| Hopper
Slope |
|
35 |
|
35 |
|
35 |
|
35 |
|
35 |
|
35 |
|
35
|
|
35
|
| Floor
Slope |
|
28 |
|
28 |
|
28 |
|
35 |
|
35 |
|
35 |
|
31
|
|
35
|
| Estimated
Weight with Tarp and Tires |
|
6,600# |
|
9,000# |
|
9,800# |
|
10,200# |
|
10,400# |
|
10,700# |
|
11,000#
|
|
11,200#
|
|
The
information herein is general in nature and is not
intended for specific application purposes. Maurer
Manufacturing reserves the right to make changes in
specifications or products at any time without notice
or obligation. Trailers pictured on these pages
may feature optional Equipment.
|
-
Available in sizes 24' to 42'
-
Prices are in US Funds, FOB Froid,
Montana, Plus Applicable Taxes
-
Prices Include 11R 24.5 Import Radials
-
24' Grain Trailer - Single Hopper -
Single Axle - $ 17,950.00
-
28' Grain Trailer - Single Hopper -
Tandem Axle - $ 22,645.00
-
30' Grain Trailer - Double Hopper -
Tandem Axle - $ 24,000.00
-
34' Grain Trailer - Double Hopper -
Tandem Axle - $ 24,670.00
-
36' Grain Trailer - Double Hopper -
Tandem Axle - $ 24,840.00
-
38' Grain Trailer - Double Hopper -
Tandem Axle - $ 25,110.00
-
40' Grain Trailer - Double Hopper -
Tandem Axle - $ 25,335.00
-
42' Grain Trailer - Double Hopper -
Tandem Axle - $ 25,570.00
Factory Installed Options:
-
Side Discharge Chute (per Hopper)
-
Front Aluminum Platform
-
Rear Aluminum Platform
-
Pintel Hook
-
Front Mudflaps
-
Double Ridge Straps on Roll Tarp
-
Vented Hopper
-
Electric Hopper Door Opening (Each
Hopper)
-
Shur-Lok Electric Roll Tarp
-
Shur-Lok Electric Roll Tarp Remote
Control Key
-
Stainless Steel Corners (4 per Trailer)
-
Aluminum Rims, Hub Piloted, each
-
Air Ride Suspension
-
Manual Dump Valve
-
Scale-o-Matic with Air Ride
-
ABS Installed on Second Axle
-
2 Speed Gear Reducers on each Hopper Door
-
Custom Tarp Colour
-
Tarp Cable Return (each)
-
Trailer Colour: (Red, Gray, Black or
Blue) White Standard - Need Colour Code of Truck - No
Metallics
-
Email
Luc for More Information!
|
